all products

A single block of tree is cut and drilled to highlight the beetle colored end grains. Live and planed edges complement each other to make each piece a unique sculpture for living.

12″ x 12″ x 18″

A single block of tree is cut and drilled to highlight the beetle colored end grains. Live and planed edges complement each other to make each piece a unique sculpture for living.

12″ x 12″ x 18″

A Single 3″ thick slab is drilled to accept penetrating pegs from the support pylons. The top of each pylon is milled to shape the integral pegs. The dramatic result is end grain which complements the long grain on the bench tops.

The pylons may be twisted in place, removed or shifted end to end. Seat length may vary upon request.

16″ x 60″ x 18″

A Single 3″ thick slab is drilled to accept penetrating pegs from the support pylons. The top of each pylon is milled to shape the integral pegs. The dramatic result is end grain which complements the long grain on the bench tops.

The pylons may be twisted in place, removed or shifted end to end. Seat length may vary upon request.

16″ x 60″ x 18″

This contemporary table with its unique wing design adds modern elegance to any room.

The solid wood pedestal is chosen to compliment the varying grain and color patterns of the single top piece. Two traditional sliding dovetails join the base and top, and are exposed for added visual aesthetic.

12″ x 45″ x 33″

This contemporary table with its unique wing design adds modern elegance to any room.

The solid wood pedestal is chosen to compliment the varying grain and color patterns of the single top piece. Two traditional sliding dovetails join the base and top, and are exposed for added visual aesthetic.

12″ x 45″ x 33″

Select downed trees are harvested for their random upside down root structure to compliment the simple mass and highlighted end grain of the wedge. Table tops are selected for color and pattern and are attached with exposed joinery.

12″ x 54″ x 33″ Sizes and color can vary on request.

Select downed trees are harvested for their random upside down root structure to compliment the simple mass and highlighted end grain of the wedge. Table tops are selected for color and pattern and are attached with exposed joinery.

12″ x 54″ x 33″ Sizes and color can vary on request.

Trestle style table with monolithic wedge legs.

42″ x 72″ x 30″

Trestle style table with monolithic wedge legs.

42″ x 72″ x 30″

Trestle style table with monolithic wedge legs.

42″ x 72″ x 30″

Inspired by Little Echo Lake near James Peak. A single beam is cut in half then halved again to reflect back on itself. 41″ x 27″ x 16″ with a 1/2″ thick glass top.

Inspired by Little Echo Lake near James Peak. A single beam is cut in half then halved again to reflect back on itself. 41″ x 27″ x 16″ with a 1/2″ thick glass top.

Inspired by Little Echo Lake near James Peak. A single beam is cut in half then halved again to reflect back on itself. 41″ x 27″ x 16″ with a 1/2″ thick glass top.

Inspired by Little Echo Lake near James Peak. A single beam is cut in half then halved again to reflect back on itself. 41″ x 27″ x 16″ with a 1/2″ thick glass top.

A single wood slab is folded & dovetailed to form the table top and leg support. The opposite leg is a solid wood wedge which includes an integral drink/vase holder.

A single wood slab is folded & dovetailed to form the table top and leg support. The opposite leg is a solid wood wedge which includes an integral drink/vase holder.

A single wood slab is folded & dovetailed to form the table top and leg support. The opposite leg is a solid wood wedge which includes an integral drink/vase holder.

A single wood slab is folded & dovetailed to form the table top and leg support. The opposite leg is a solid wood wedge which includes an integral drink/vase holder.

3” thick slabs are handpicked for color and character. Each piece of the table top is cut from a single slab. The cross offset or symmetry is determined by the most interesting grain match of the slab pieces. 8” x 8” thick legs are cut from a single piece of timber and 2 are drilled to hold a vase or favorite bottle of wine in the table.

41″ x 41″ x 16″

3” thick slabs are handpicked for color and character. Each piece of the table top is cut from a single slab. The cross offset or symmetry is determined by the most interesting grain match of the slab pieces. 8” x 8” thick legs are cut from a single piece of timber and 2 are drilled to hold a vase or favorite bottle of wine in the table.

41″ x 41″ x 16″

3” thick slabs are handpicked for color and character. Each piece of the table top is cut from a single slab. The cross offset or symmetry is determined by the most interesting grain match of the slab pieces. 8” x 8” thick legs are cut from a single piece of timber and 2 are drilled to hold a vase or favorite bottle of wine in the table.

41″ x 41″ x 16″

A single 12” x 12” timber is split on the long diagonal to make the two legs of this piece. A single cross bar is dovetailed to each leg to tie them together. The mass of the legs stabilizes the entire piece. The beveled glass top is held above the wood with satin finish stainless steel posts.

12″ x 48″ x 36″ A matching desk design is also available.

A single 12” x 12” timber is split on the long diagonal to make the two legs of this piece. A single cross bar is dovetailed to each leg to tie them together. The mass of the legs stabilizes the entire piece. The beveled glass top is held above the wood with satin finish stainless steel posts.

12″ x 48″ x 36″ A matching desk design is also available.

A single 12” x 12” timber is split on the long diagonal to make the two legs of this piece. A single cross bar is dovetailed to each leg to tie them together. The mass of the legs stabilizes the entire piece. The beveled glass top is held above the wood with satin finish stainless steel posts.

12″ x 48″ x 36″ A matching desk design is also available.

A single 12” x 12” timber is split on the long diagonal to make the two legs of this piece. A single cross bar is dovetailed to each leg to tie them together. The mass of the legs stabilizes the entire piece. The beveled glass top is held above the wood with satin finish stainless steel posts.

12″ x 48″ x 36″ A matching desk design is also available.

Lodgepole pine trees commonly split from a single trunk into 2 or more trunks above the main trunk. We harvest logs with these splits in place and use matched slabs in single and ensemble pieces. The slab in this style table appears to be a confluence or a pair of pants. A matching cocktail table is available from the same log.

16.5″ x 72″ x 30″

Lodgepole pine trees commonly split from a single trunk into 2 or more trunks above the main trunk. We harvest logs with these splits in place and use matched slabs in single and ensemble pieces. The slab in this style table appears to be a confluence or a pair of pants. A matching cocktail table is available from the say log.

16.5″ x 72″ x 30″

Lodgepole pine trees commonly split from a single trunk into 2 or more trunks above the main trunk. We harvest logs with these splits in place and use matched slabs in single and ensemble pieces. The slabs in this style table appear to be pairs of pants laid together. A matching console table is available from the same log.

Lodgepole pine trees commonly split from a single trunk into 2 or more trunks above the main trunk. We harvest logs with these splits in place and use matched slabs in single and ensemble pieces. The slabs in this style table appear to be pairs of pants laid together. A matching console table is available from the say log.

Lodgepole pine trees commonly split from a single trunk into 2 or more trunks above the main trunk. We harvest logs with these splits in place and use matched slabs in single and ensemble pieces. The slabs in this style table appear to be pairs of pants laid together. A matching console table is available from the say log.

A single 3″ slab and solid pedestal are attached with a cantilevered sliding dovetail connector.

12″ x 17″ x 24″ Sizes may vary.

The Bias Cut slab top is floated on sliding dovetail joints above the curving bias cut legs. 

62″ x 12″ x 32 1/2″ High.

The Bias Cut slab top is floated on sliding dovetail joints above the curving bias cut legs. 

62″ x 12″ x 32 1/2″ High.

The Bias Cut slab top is floated on sliding dovetail joints above the curving bias cut legs. 

62″ x 12″ x 32 1/2″ High.

The Bias Cut slab top is floated on sliding dovetail joints above the curving bias cut legs. 

62″ x 12″ x 32 1/2″ High.

The Bias Cut slab top is floated on sliding dovetail joints above the curving bias cut legs. 

62″ x 12″ x 32 1/2″ High.

54″ x 24″ x 16 1/6″. 11 1/2″ thick beetle kill mountain pine beam, runners made of 5/4″ thick beetle kill walnut harvested in downtown Denver and a 1/2″ thick glass top. For sale in the studio.

54″ x 24″ x 16 1/6″. 11 1/2″ thick beetle kill mountain pine beam, runners made of 5/4″ thick beetle kill walnut harvested in downtown Denver and a 1/2″ thick glass top. For sale in the studio.

54″ x 24″ x 16 1/6″. 11 1/2″ thick beetle kill mountain pine beam, runners made of 5/4″ thick beetle kill walnut harvested in downtown Denver and a 1/2″ thick glass top. For sale in the studio.

54″ x 24″ x 16 1/6″. 11 1/2″ thick beetle kill mountain pine beam, runners made of 5/4″ thick beetle kill walnut harvested in downtown Denver and a 1/2″ thick glass top. For sale in the studio.

54″ x 24″ x 16 1/6″. 11 1/2″ thick beetle kill mountain pine beam, runners made of 5/4″ thick beetle kill walnut harvested in downtown Denver and a 1/2″ thick glass top. For sale in the studio.

These hexagon block candle holders are cut from highly colored small diameter trees to highlight the wood’s end grain. Multiple blocks are cut from the same tree and used in matched sets. Sets are available assembled in 4 piece “quad” and 7 piece “snowflake” patterns or in loose sets up to 9 or more pieces.

These hexagon block candle holders are cut from highly colored small diameter trees to highlight the wood’s end grain. Multiple blocks are cut from the same tree and used in matched sets. Sets are available assembled in 4 piece “quad” and 7 piece “snowflake” patterns or in loose sets up to 9 or more pieces.

These hexagon block candle holders are cut from highly colored small diameter trees to highlight the wood’s end grain. Multiple blocks are cut from the same tree and used in matched sets. Sets are available assembled in 4 piece “quad” and 7 piece “snowflake” patterns or in loose sets up to 9 or more pieces.

Sizes and availability vary greatly and thus add to the uniqueness of each piece.

6″ , 9″ & 12″ heights

Sizes and availability vary greatly and thus add to the uniqueness of each piece.

6″ , 9″ & 12″ heights

3.25″ x 12″ class column bases are pocketed into 8″ x 8″ square monoliths ranging in heights of 32″, 34″, 36″ and 38″. Slight tapers are cut on 2 sides of the “Chutes” to intersect the glass pocket which adds unique shapes to each piece.

Chutes are cut from select logs chosen for distinct grain patterns. The logs are cut to maximize the used cross sections of trees which results in dramatic cracks and splits in the wood. Colored epoxy fills the crack and colors are made to order.

3.25″ x 12″ class column bases are pocketed into 8″ x 8″ square monoliths ranging in heights of 32″, 34″, 36″ and 38″. Slight tapers are cut on 2 sides of the “Chutes” to intersect the glass pocket which adds unique shapes to each piece.

Chutes are cut from select logs chosen for distinct grain patterns. The logs are cut to maximize the used cross sections of trees which results in dramatic cracks and splits in the wood. Colored epoxy fills the crack and colors are made to order.

3.25″ x 12″ class column bases are pocketed into 8″ x 8″ square monoliths ranging in heights of 32″, 34″, 36″ and 38″. Slight tapers are cut on 2 sides of the “Chutes” to intersect the glass pocket which adds unique shapes to each piece.

Chutes are cut from select logs chosen for distinct grain patterns. The logs are cut to maximize the used cross sections of trees which results in dramatic cracks and splits in the wood. Colored epoxy fills the crack and colors are made to order.

Like the high altitude Pika, these glass vases peer out of their secure resisting place. The 3” x 12” glass vase can be easily replaced with glass captured candles or any similar accessory you may imagine. The backside live edge, exposed end grain top and the angled front face showcase the larva galleries and the bluestain effect of the beetles.

5″ x 7″ x 11″ or 17.5″ high

Large dimension timber simply angle cut on each face to show the story of the tree and its life cycle. Highlight your artwork with this sleek design.

Large dimension timber simply angle cut on each face to show the story of the tree and its life cycle. Highlight your artwork with this sleek design.

Large dimension timber simply angle cut on each face to show the story of the tree and its life cycle. Highlight your artwork with this sleek design.